TOP  |   PREVIOUS ITEM  |  SLIDESHOW  |   NEXT ITEM   ( 56 of 110 )

VOYAGE SEAVIEW CUSTOM DISPLAY STAND

Updated: January 30, 2013

A beautifully designed replacement display stand set for your Moebius 39" "Seaview" model from "Voyage To The Bottom Of The Sea". The original stand lifts your model up only 2", but this replacement set brings it up 6"! This will allows you to fill in the two holes on the bottom of the model where the original stand fits, providing a more seamless appearance to the underside. If you are using these on a previously built model, simply position them under the existing holes. The added height allows you to see into the Flying Sub bay easily, not to mention giving you room to attach or remove the Flying Sub when desired. This custom display stand set is made of 1/4" thick clear acrylic, and matches up perfectly to the bottom contour of your model. It can be used for either the 4-window or the new 8-window versions of the model.

Also included is the 4" x 6" "S.S.R.N.Seaview" placard as shown in the photos and 4 felt pads so that ONLY the pads actually touch the model. The placard is available for the 4-window, (shown in the photos), or 8-window versions. The stands will come unassembled and the two pieces simply need pressed together until the upright is seated in the 6" circular base. No glue is required, but if you desire to glue them you can use a drop or two of "Weld-On 16" or "Super-Gold +" CA glue for clear parts. Note: Moebius Seaview model NOT included.

Retails: $29.95


Send me your Comments:
Your Name:
Your Email Address:
Comments:



UncleOdiesCollectibles.com is owned by Robert Vanderpool. Copyright Robert Vanderpool. All rights reserved. All other Trademarks and Copyrights are property of their respected owners. Copyright Policy.