Updated: September 01, 2011|
An unpainted CREATURE FROM THE BLACK LAGOON "Gillman" resin wall bust, sculpted by Byron Lee.
This highly-detailed resin wall bust measures approximately 14 inches tall and 11 inches wide. It measures 8.5 inches deep from your wall, out to the tip of its upper lip. It is 1:1 scale and has been signed on the inside by the sculptor.
This bust has been carefully shell-casted by hand in quality GREEN-tinted resin and has an open back, ready to be foam-filled if you so choose. It is ready to paint and hang with a simple nail in your wall.
As with all resin model kits, minor sanding may be required to remove some leftover resin flashing. Minor putty work and paint will be required to achieve the results shown in the built-up photos.